The aim of this blog is to connect fly-tyers all over the world, to share, techniques, patterns, information and knowledge.

Foils rush in where angels fear to tread

Keeping on the salt water theme for sea trout, heres another sand eel pattern that mixes the new with the old.

IMG_8151

When designing bait fish patterns, a few things I consider are the shape and silhouette of the fish to be imitated. This is important as you never know if the fish will see it, when fished, in a reflected or backlight situation. The size and colour, and last but not least movement. All these can be achieved with a careful selection of materials. I sometimes also like to give the patterns a three dimensional effect. I achieve this through building layers. This is made much easier with Bug Bond.

Observe the bait fish that you wish to imitate, take a close look at it, there are many great websites that have fantastic photography, illustrations and films of these bait fish. Try and decide the most distinguishing features and characteristics of them. Once you have done this choose materials that best represent these features in colour and movement.  After a while you better understand the materials you work with and the choices become easier.

Hook    Mustad Big Game light # 6-4  http://mustad.no/catalog/na/product.php?id=191

Thread   Dyneema   http://www.whitetailflytieing.com/index.htm

Underbody   Craft fur

Body    Buck tail topped with peacock herl

Sides   Green and blue grizzle cock hackles

Cheeks  Fleye foils   http://www.theflypeople.com/index.php/24-popflyes/29-bob-popovics-fleye-foils-de.html

Head tube   E-Z Body   http://www.e-zbody.com/

Head  Bug Bond   http://www.bug-bond.moonfruit.com/     http://www.veniard.com/

Eyes   Tape eyes

IMG_80851
Place you Big Game light hook in the vice, keeping the hook shank horizontal.

IMG_80862

Attach you tying thread to the front third of the hook shank.

IMG_80893

Tie in a length of tapered craft fur. Its important that you brush out the fibers of the craft fur before you tie it in. The craft fur will give a little movement to the body of the fly when fished.

IMG_80904

Now a nice bunch of straight whit buck tail under the craft fur.  The generic name for deer tails has become ‘buck tails’ even if they have come from a doe deer which generally have a little shorter fibers, so be sure when buying buck tail choose the ones with nice long straight hair. The buck tail tied in this way will help support the craft fur and keep it in position.

IMG_80915

Now cover the craft fur with a bunch of brown buck tail. Once this is done you can place a drop of varnish on the whippings just to strengthen them.

IMG_80936

On top of the buck tail tie in four or five lengths of peacock herl. The best herl for this is found just under the eye of the peacock tail feather. Make these a little longer than the buck tail.

IMG_8096

7

Select two green cock hackles and tie in on the sides.

IMG_80978

Vail the green hackles with two blue dyed grizzle hackles a little shorter than the the green ones.

IMG_80999

Whip finish and remove your tying thread. Take a short length of E-Z Body and thread this over the head of the fly.

IMG_810010

Re attach your tying thread and tie down the E-Z Body behind the hook eye.

IMG_810211

Take another three or four strands of peacock herl and tie in for the topping.

IMG_810412

Select the correct size of Fleye foil for the hook size.

IMG_810813

Using the short tab on the foil, tie them in, one each side.

IMG_810914

Whip finish and remove the tying thread. Holding down the peacock herl topping apply a little bug bond to the head.

IMG_811215

Cure the Bug Bond with the UV light. You can then build a few thin layers of Bug Bond over the whole head until you achieve the correct size and shape.

IMG_815116

Apply the tape eyes and give one last coat of Bug Bond. Once the fly is finished, wet your fingers and soak the wing, while stroking it backwards. This will hold the wing in the correct shape and dry this way ready for use.

6 responses

  1. Justin

    WOW! That’s absolutely amazing! So beautiful, and you simplified the instructions so well! Thank you! Please keep it up.
    – Justin Aldrich.

    September 6, 2013 at 9:51 pm

    • Hi Justin, Thanks for the comment. I will be posting pore soon.

      Cheers

      Barry

      September 7, 2013 at 9:18 am

  2. Armando

    Wonderful..again..!!

    September 10, 2013 at 5:04 am

    • Thanks Amando.

      September 12, 2013 at 10:57 am

  3. Chris Watson

    Great looking fly!!!!

    All the best Chris

    September 17, 2013 at 11:16 am

    • Thanks Chris, Maybe i will see you at BFFI next year? I will be tying on the Veniard stand.

      Cheers

      Barry

      September 17, 2013 at 12:31 pm

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s