The aim of this blog is to connect fly-tyers all over the world, to share, techniques, patterns, information and knowledge.

The Black Pennell

Black Pennell & Family…

 IMG_5493

One of the classic ‘Black’ flies that has survived the test of time.  Classified as a fancy wet or loch style pattern the Black Pennell came from the tying bench of Mr H. Cholmondeley Pennell a wealthy Edwardian english gentleman, who loved fishing in Northern Europe. There are several styles in tying this pattern, some with a fine slim body of only one layer of tying thread, the tapered body, as shown here and one with seals fur or black wool. Although some listings say that the hackle should be of a black hen tied sparingly, the original is of cock hackle tied long extending over the hook point and into the bend. When used during lake fishing these flies are normally fished as part of a team of flies, one on the point and two droppers. The fly on the point and bottom dropper being  slightly heavier wet flies, and the top dropper being a larger bushy dry fly that makes a wake when retrieved. The idea is that the wake fly acts as an attractor  getting the trouts attention. When the fish rises to inspect the wake fly they see the wets and take one of them.  If done correctly, fished from a drifting boat, this is an extremely effective method  of fishing. When river fishing the black pennell family of flies are fished in the traditional way of ‘down and across’ stream letting them ‘swing’ around at the end of the cast. 

Hook Mustad  R30NP-BR 94833 # 14-10

Thread Black

Butt Flat silver tinsel

Tail Golden Pheasant tippet

Body Black floss (occasionally black seals fur)

Rib Fine oval silver tinsel

Hackle Black cock

 

IMG_4997 

1

Place your hook in the vice, make sure that it is horizontal. Attach your tying thread a couple of mm behind the hook eye and cover the hook shank with a even foundation of tying thread.

 IMG_4998

2

Cut a length of flat silver tinsel and tie this in on the underside of the hook shank. Wind your tying thread five or six turns forward towards the hook eye.

 IMG_5002

3

Now make two or three turns of flat silver tinsel for the butt and tie off. Trim off the excess.

 IMG_5004

4

This is a neat little trick to get a perfect tippet tail. Take a whole golden pheasant tippet feather and and cut out a ‘V’ shape as shown with just the right amount of tippets on one side.

 IMG_5005

5

Trim off one side of the tippet and lie flat on top of the hook shank. Secure with just a couple of turns of tying thread and adjust the tail to the correct length and position.

 IMG_5006

6

Trim off the remaining tippet excess and wrap tying thread forward and back along the hook shank until you have a slightly tapered body, tie in a length of fine oval silver tinsel as shown. If you are using extra fine tying thread, you can tie in a length of black floss for the body.

 IMG_5008

7

With your tying thread at the head of the fly make five or six even turns of oval silver tinsel for the rib and tie off a few mm behind the hook eye. Making sure that you have enough room for the hackle.

 IMG_5010

8

Select and prepare a long fibered black cock hackle and tie in where the tinsel finishes. Wind your tying thread forward to just behind the hook eye.

 IMG_5011

9

Now carefully make two or three turns of hackle, depending on how webby the hackle is. Make sure while wrapping that all fibers with each turn are pointing backwards. Tie off the hackle and remove the excess.

 IMG_5013

10

Whip finish and remove the tying thread,  Now heres another trick to get the hackle to lie correctly. Wet your fingers with a little spit and stroke backwards. Now take a small plastic tube, clear is best, so that you can see how the hackle is lying inside and slip this over the head of the fly and twist from side to side to adjust how the hackle is lying.

 IMG_5034

11

After a few minutes, depending on how wet the hackle was care fully remove the tube and the hackle will be perfect. With the hackle out of the way of the fly head you can now varnish the head. A perfect Black Pennell.

 IMG_5027

12

Silver Pennell

 

This variant with a slim silver tinsel body is preferred for salmon and sea trout. sometimes tied with a hot orange dyed tippet tail.

 

Hook Mustad  R30NP-BR 94833 # 14-10

Thread Black

Tail Golden Pheasant tippet (Occasionally dyed hot orange)

Body Flat silver tinsel

Rib Fine oval silver tinsel

Hackle Black cock

 IMG_5031 

13

Blae and Black

 

This winged version of the Black Pennell was extremely popular during midge hatches and in larger sizes for migratory fish.

Hook Mustad  R30NP-BR 94833 # 14-10

Thread Black

Tail Golden Pheasant tippet

Body Black floss (occasionally black seals fur and with a silver tinsel rib)

Hackle Black cock

Wing Grey teal or mallard quill slips

 

4 responses

  1. David, aka, faithful follower

    Simply beautiful. I’m going to botch up a few of these for the bluegill hereabouts.
    Thank you!!

    February 13, 2014 at 7:03 pm

  2. An excellent tutorial! Sometimes old school is just what the Dr. ordered.

    February 13, 2014 at 8:55 pm

  3. Kelly L

    I love this pattern. I’ve tied a few of these myself in the past. They did perform well for me.
    Thank you for the step by step, and different versions too. I liked your trick for getting the tail right! All beauties, well done!

    February 13, 2014 at 10:13 pm

  4. Tom

    Love it Barry! Thanks for sharing your fly patterns with us.
    I always like to share your patterns on my group, Fly Tying Patterns & Videos,
    so others can enjoy your flies too.
    Tom 🙂

    February 15, 2014 at 6:46 pm

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s