The aim of this blog is to connect fly-tyers all over the world, to share, techniques, patterns, information and knowledge.

Posts tagged “Fly tying books

Pseudo Spinner

The Pseudo Spinner.

Fishing, or even identifying a mayfly spinner fall can be one of the most challenging situations a fly fisherman can experience! Its all about breaking codes and learning to read the signs. With the larger mayflies its somewhat easier to recognize the spinner fall, danica and vulgata are so large that they can be seen at a greater distance floating in a crucifix posture and lifeless in the surface, sometimes with such a high mortality rate they cover the whole surface of the river. But smaller darker and sometimes almost transparent species can be difficult to see even at close quarters.

 

Mayflies are known for their short lived life, with some species having less than an hour to find a mate and deposit eggs before they die. The first sign to look for, after the initial hatch, is high above you, the swarming dancing, mating mayflies high above the tree tops.  After mating and this swarming becomes sparser the males are drained of energy and are fighting to keep themselves airborne but gradually floating down closer to the water, where they die and lie with wings and tails spread out on the surface. The females, who hatch later than the males have a little more energy left to fly upstream to lay their eggs so the current will carry them back down to be deposited in the same stretch of river bed where she lived her nymphal stage of life. After which she dies and becomes spent.

High above the tree tops.

 

If after examining the waters surface and no spent spinners are visible, look for fish that are steady risers. This is a normal rise form for fish selectively feeding on spent spinners.  That being said, smaller fish can become wild in the beginning of a spinner fall making small splashy rises and even leaping clear of the water to take them as they fall.  As day turns into night and the spent spinners begin to drown and are trapped in the surface film slightly sinking, the larger fish begin to feed on them, rising every few seconds, not big splashy rises but sipping or slow head and tailing as the spent spinners float over them, as with all predators maximizing energy intake and minimizing energy consumption. Larger ‘Experienced’ fish seam to know that there is no escape for these dead and drowning flies.

This was taken under a spinner fall, although they where still hatching the trout wouldn’t touch them.

This is a mayfly pattern shown here represents NO specific species, but with just a tiny alteration in size and colour can be a good representation for most hatches of smaller to medium sized mayflies.  The most time consuming part of this pattern is stripping the peacock herl of its fibers. There are a few ways that you can do this. One is with a regular pencil erasure, just lie the herl down on a flat surface and rub the herl away from you. The other is to pull the herl through your finger and thumb nail as shown here. It takes a little time to master this technique but once you have done it a few times its plain sailing!

 

Hook Mustad R50 # 18-12

Tying thread Dyneema

Tail Coq de leon

Body Stripped peacock herl

Over body Bug Bond

Wings CDC hackles

Thorax CDC spun into dubbing loop

 

1
Place your hook in the vice as shown.

2
Select some nice Coq de Leon hackle fibers.

3
Run the tying thread along the hook shank until you come to the hook bend. Tie in the center tail first, then the two side tails, making sure that they are all about the same length.

4
If you want to make the fly a little more robust, put a tiny drop of super glue right on the tail bases. This will make everything stronger and help keep the tails in place.

5
Now run the tying thread forward and build a slightly tapered under body to shape the quill over body.

6
Choose a good strong herl from a peacock tail feather and strip off the fibers.

7
Tie in the stripped quill on the underside of the hook shank at the tail base.

8
Wind on the quill the right way! One side of the quill has better markings than the other. Tie off at the wing base.

9
Remove the surplus quill and give the body a coat with Bug bond.

10
Give the quill body a blast with the UV light, if you are using varnish you will have to wait for the body to dry before you continue.

11
The dry coated quill body.

12
Select two small well fibered CDC hackles. Trim them both down with curved scissors as shown.

13
Tie in your two CDC wings pointing slightly forward.

14
Spin a little CDC in a dubbing loop behind the wings.

15
Wind on the CDC, firstly behind the wings and then between and forward finishing behind the hook eye.

16
View from above of the finished thorax.

18
Whip finish and you have a fine mayfly spinner that floats like a cork.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Image

Working hard!

Working hard!

I haven’t forgotten you all, just lots of work to do! I have been tying at shows just about every weekend now for months, and I had Marc Petitjean hear for a week taking photographs for his new book on tying with CdC. I have now started work on my ‘Patterns for salt water sea trout’ book. It will include 50 patterns step by step and lots of new techniques and new materials. This is one of the first patterns photographed ‘The Hoodlum’ I am also finishing up four small books in the proven patterns series, Dry flies for grayling, Nymphs for grayling, Salmon flies and Flies for ‘other’ salt water species in Northern Europe.

I will try and get back to my normal routine before long and start posting again.

Have a great season and tight lines!


Pseudo Spinner

The Pseudo Spinner.

Fishing, or even identifying a mayfly spinner fall can be one of the most challenging situations a fly fisherman can experience! Its all about breaking codes and learning to read the signs. With the larger mayflies its somewhat easier to recognize the spinner fall, danica and vulgata are so large that they can be seen at a greater distance floating in a crucifix posture and lifeless in the surface, sometimes with such a high mortality rate they cover the whole surface of the river. But smaller darker and sometimes almost transparent species can be difficult to see even at close quarters.

 

Mayflies are known for their short lived life, with some species having less than an hour to find a mate and deposit eggs before they die. The first sign to look for, after the initial hatch, is high above you, the swarming dancing, mating mayflies high above the tree tops.  After mating and this swarming becomes sparser the males are drained of energy and are fighting to keep themselves airborne but gradually floating down closer to the water, where they die and lie with wings and tails spread out on the surface. The females, who hatch later than the males have a little more energy left to fly upstream to lay their eggs so the current will carry them back down to be deposited in the same stretch of river bed where she lived her nymphal stage of life. After which she dies and becomes spent.

High above the tree tops.

 

If after examining the waters surface and no spent spinners are visible, look for fish that are steady risers. This is a normal rise form for fish selectively feeding on spent spinners.  That being said, smaller fish can become wild in the beginning of a spinner fall making small splashy rises and even leaping clear of the water to take them as they fall.  As day turns into night and the spent spinners begin to drown and are trapped in the surface film slightly sinking, the larger fish begin to feed on them, rising every few seconds, not big splashy rises but sipping or slow head and tailing as the spent spinners float over them, as with all predators maximizing energy intake and minimizing energy consumption. Larger ‘Experienced’ fish seam to know that there is no escape for these dead and drowning flies.

This was taken under a spinner fall, although they where still hatching the trout wouldn’t touch them.

This is a mayfly pattern shown here represents NO specific species, but with just a tiny alteration in size and colour can be a good representation for most hatches of smaller to medium sized mayflies.  The most time consuming part of this pattern is stripping the peacock herl of its fibers. There are a few ways that you can do this. One is with a regular pencil erasure, just lie the herl down on a flat surface and rub the herl away from you. The other is to pull the herl through your finger and thumb nail as shown here. It takes a little time to master this technique but once you have done it a few times its plain sailing!

 

Hook Mustad R50 # 18-12

Tying thread Dyneema

Tail Coq de leon

Body Stripped peacock herl

Over body Bug Bond

Wings CDC hackles

Thorax CDC spun into dubbing loop

 

1
Place your hook in the vice as shown.

2
Select some nice Coq de Leon hackle fibers.

3
Run the tying thread along the hook shank until you come to the hook bend. Tie in the center tail first, then the two side tails, making sure that they are all about the same length.

4
If you want to make the fly a little more robust, put a tiny drop of super glue right on the tail bases. This will make everything stronger and help keep the tails in place.

5
Now run the tying thread forward and build a slightly tapered under body to shape the quill over body.

6
Choose a good strong herl from a peacock tail feather and strip off the fibers.

7
Tie in the stripped quill on the underside of the hook shank at the tail base.

8
Wind on the quill the right way! One side of the quill has better markings than the other. Tie off at the wing base.

9
Remove the surplus quill and give the body a coat with Bug bond.

10
Give the quill body a blast with the UV light, if you are using varnish you will have to wait for the body to dry before you continue.

11
The dry coated quill body.

12
Select two small well fibered CDC hackles. Trim them both down with curved scissors as shown.

13
Tie in your two CDC wings pointing slightly forward.

14
Spin a little CDC in a dubbing loop behind the wings.

15
Wind on the CDC, firstly behind the wings and then between and forward finishing behind the hook eye.

16
View from above of the finished thorax.

18
Whip finish and you have a fine mayfly spinner that floats like a cork.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


The fly for Autumn Pike…

Pike Steamer, a sure attractor for autumn pike

“Steaming is term given to a style of mugging where an unsuspecting victim is chosen, followed and attacked suddenly at great speed without warning”.

The art of camouflage, surprise and speed are the pikes most powerful weapons for securing a meal. Of course some meals are obtained easier than others, but generally speaking the freshwater crocodile wont say no to a free meal.  Like the muggers victims the pikes are chosen for much the same reasons, easy pickings! weak and old, or both, unable to move fast or get away, once attacked and of course the bounty.

The idea behind this pattern is to work on all the pikes predatory instincts, and make the victim (the fly) as attractive and irresistible as possible. I do this through fly design and presentation.  When designing predatory patterns there are several things to consider and a few key elements that all patterns should have. If you want a general pattern that you could use just about anywhere for anything, then you should choose to imitate a natural food that is widely available – like small bait fish. Then you have to consider the four most important attractor factors:

Movement… colour… eyes… and sound.

The movement in this pattern is achieved through a combination of materials. Both the marabou and Icelandic sheep hair are extremely mobile in water, but their effect is enhanced by the weight of the Epoxy head. Predators find this swimming action, irresistible.

The eyes, which are always an attack point, are oversized for additional predator impact.

If you keep all these factors in mind when designing predatory patterns you won’t go wrong.

During a three week fly fishing tip to the Amazon, home of more fresh water predatory fish than anywhere else on the planet, I developed a technique using surface splashing to stimulate feeding and awareness of my streamer, which works just as well for our own pike. Maybe you’d like to add this technique to your own armoury of tactics.

It requires though a specific leader set-up to work at it’s best, especially when fishing large flies. And it’s simplicity in itself – take around 1.5m of 30lb mono, and connect the fly to the mono with a Rapala knot. This will give a better swimming action on the stiff mono. (By the way, I have never encountered a leader shy pike, and seldom use a wire trace.)

This short, stiff leader will not only give bigger flies better turn-over when casting, but also better control and precision in presentation, and (touch wood), I have never had a break-off. The following technique is only possible with such a leader.

Firstly, find a likely spot on the water, where there’s maybe a pike lying in wait, or resting after a hunt. Before casting, make sure that your streamer is well-soaked and all air removed. This will not only make it sink quicker but also make it more aerodynamic and so easier to cast. Then with a short, hard and direct cast, shoot your streamer into the water as hard as you can – then repeat this three or four times in the same area of water. Splash that fly and heavy leader as loud as you like, it will surely attract the immediate attention of any pike within spitting distance.

Make one last cast and this time let your streamer sink… and then retrieve as normal. If there’s a pike in the vicinity it will come to the fly, the rest, as they say, is up to you…

Hook: Mustad S71SNP-ZS # 3/0-5/0

Thread: Dyneema

Wing: Icelandic sheep hair

Flash: Holographic tinsel

Over wing: Light Brite

Collar: Spun rabbit

Cheeks: 2 Grizzle hackles

Wing topping: Five strands of long natural peacock herl

Hackle: Spun Marabou Yellow

Eyes: Large mobile eyes coated with resin

1
Place hook in vice as shown and attach tying thread at the rear of the hook shank.
Tie in a long length of fine tapered Icelandic sheep hair or synthetic sub. If you choose a synthetic substitute make sure that its not so stiff it doesn’t pulsate in the water, and that its not so soft it lacks body.

2
Now taking the wing material in your left hand, back comb the sheep hair. This means run the comb the opposite way you would normally, like girls did the the early eighties to get more body for bigger hair. This will accumulate the shorter hair fibers at the base of the tail and create the illusion of more body volume, with out adding extra weight to the pattern.

3
Tie-in on top of the wing approximately 10 long strands of holographic tinsel, or another chosen flash material of your choice. Place a few drops of glue or varnish on the whippings to make the fly stronger and more durable.

4
On top of the wing tie in a bunch of pearl light brite to add a little more volume and attractor flash to the wing and body.

5
Cut a short length of cross-cut rabbit strip and place the rabbit strip in a dubbing loop and spin to make a nice dense dubbing brush.
NB. If spinning a thick-dense rabbit fur, with under wool, you will need an extremely strong tying thread to make the dubbing loop. If you use a standard thread it will most likely break before the loop is spun enough to hold the fur securely. It also helps to use a heavier dubbing spinner rather than a lighter one.

6
Wind in the spun rabbit hair making sure you comb back the fibers with each turn when winding inn to form the collar as shown.

7
Select 2 broad grizzle hackles and colour on both sides of the hackle with a waterproof felt pen.

8
Tie in the grizzle hackles one each side of the collar.

9
For the wing topping tie in 5 long strands of peacock herl. The strongest herl is found just below the peacock eye on the tail feather. If you are having problems getting the herl to curve over the wing correctly, run them one at a time, carefully over the blunt side of a pair of scissors, between your finger and thumb, just like you would with a ribbon when wrapping a gift.

10
Make another dubbing brush as in steps 5 & 6 but this time with long fine tapered marabou.

11
Wind the dubbing brush on to make the front hackle. Finish off with a couple of whip finishes.

12
Glue on 2 large mobile dolls eyes. Make sure that these are evenly balanced on the hook shank. Or if you wish to give your steamer a injured affect, glue on the eyes unevenly or even, two different eyes, one much larger than the other, and the fly will fish off center.

13
Give the eyes and head a coat of Bug Bond or Epoxy resin, making sure that you coat both eyes in a “glass ball” of resin.

14
Once the Bug Bon is applied you give it a quick blast with the UV light to cure. Or if you have used Epoxy place it on a rotary dryer if you have one until set.

15
Your finished and fish ready Pike steamer.


‘Where the spirit does not work with the hand there is no art’ Leonardo Davinci

Tied in Hand

Odyssey of a Fly-Tyer

by

Sven-Olov Hård

In his early teens, Sven-Olov Hård began attaching yarn and hackles to the shank of a fishing hook with thread, struggling to copy the illustrations of salmon flies he found in old Hardy fishing catalogues. Little did he know, that a little over three decades later, he would be a master of the craft and one of the most distinguished ‘in-hand’ fly tyers of our time.

I myself have been tying flies for many years, and have gained through my contributions to fishing magazines and books, the unfortunate label of an “Expert” but when I examine a salmon fly tied in hand by Sven-Olov, I am soon brought down to earth, feeling rather like a second rate art student, studying an old master.  Anyone who has ever tried to tie a fully dressed salmon fly, will know of the patience required for building a mixed wing, or a flawless floss body!  Sven-Olov does all this without a vice!

Tied in hand, takes you on the fascinating journey of a salmon fly-tyer, that begins with a young boys interest in fishing and results with a grown mans obsession with the classic salmon fly, ending in Scotland on the rivers Tay and Spey to cast his flies into the waters they where originally made for. With every step along the way wonderfully illustrated with full page photographs of his flies and charming water colours by Lars Sundström. He writes, not only with a great knowledge on the subject of materials and the techniques of tying in hand but also with a heartfelt affection for his passion.

This is a delightful book, full of beautiful fishing flies tied as originally intended and accompanied by their history and recipes.

TIED IN THE HAND: ODYSSEY OF A SALMON FLY-TYER. BY SVEN-OLOV HARD.



Three new fly tying booklets just published heres the reviews:

Image

Flies for pike:
Flyfishing for pike has never been more popular. Barry Ord Clarke presents us with a new generation of successful flies for pike developed by expert pike flyfishermen and fly-tyers. Herman Broers, Dougie Loughridge, Simon Graham, Ulf Hagstrom, Ad Swier and Steve Silverio have all contributed their well-proven patterns. Ten proven patterns – flies that have proved their worth – catching many big pike in British, European and North American waters. With step-by-step fly-tying instructions, and many tips from the experts on luring this exciting quarry. This is the first in the new Proven Patterns series of step-by-step guides to flies that catch fish.
Flies for Sea trout rivers:
The elusive and challenging sea-trout, lithe and strong from feeding in the sea, inhabits the wildest places in Britain and Europe. Like the salmon it ceases feeding once in the river and its capture calls for the highest skills of the angler and fly-tyer. On the darkest nights it abandons its customary caution and may fiercely attack the flyfisher’s lure, and even under low-water conditions it may be tempted by a skillfully presented nymph. Barry Ord Clarke and sea-trout experts Illtyd Griffiths, Steffan Jones, Gerhard Schive and Bjarne N Thomsen present us with 15 proven patterns for sea-trout, step-by-step tying instructions, and tips on how to fish them. This is the third in the new Proven Patterns series of step-by-step guides to flies that catch fish.
Flies for Sea trout Salt water:
Flyfishing for sea-trout in the sea is one of the most exciting recent developments in angling. It had long been practised on our northern and western shores, largely using traditional wet-fly tactics, but the massive growth of the sea-trout fishery in Scandinavia has led to the development of innovative and highly successful fly patterns, many of them imitating the natural prey of the sea-trout in the sea. Barry Ord Clarke and sea-trout experts Claus Eriksen and Bjarne N Thomsen present us with ten proven patterns for saltwater sea-trout, with step-by- step tying instructions, and tips on how to fish them. This is the second in the new Proven Patterns series of step-by-step guides to flies that catch fish.
Forthcoming titles include: Proven Patterns: Flies that catch Salmon. Proven Patterns: Flies for Carp and Coarse Fish. Proven Patterns: Flies for Bass, Mullet & other Sea Fish. Proven Patterns: Dry Flies for Grayling. Proven Patterns: Flies for Rainbow Trout.
Link to Cochy-Bonddu Books:
http://www.anglebooks.com/search.php?xSearch=barry%20ord%20clarke%20proven%20patterns%202012&xPriceFrom=0&xPriceTo=0&xSort=name&xPage=1