Elk Hair Caddis
Hook Mustad R30 # 16-10
Body Olive dubbing
Hackle Brown Cock
Wing Bleached elk
This classic caddis pattern is from the tying bench of well know American fly tyer Al Troth.
This is probably the most well known caddis pattern in existence, and rightly so. The EHC as it is also known is one of the best adult caddis patterns that you could use. I myself have fished this pattern for at least 30 years, and every season it never fail to provide me with great sport.
Most of the materials are readily available but in the past few years the bleached elk hair has become more difficult to obtain. Al Troth himself recommends that you use the thigh hair from a cow elk, bleached, this I have found impossible to obtain but any good quality bleached elk does a good job. If you find like me that the bleached elk cannot be obtained, regular elk will also do a good job, it’s just a little more difficult to see at a distance on the water.
You can fish this pattern dry so that it just floats high on the hackle points, you can fish it half drowned so that it gurgles like a popper when retrieved and you can even fish it wet just under the surface. A brilliant all round pattern.
Attach the tying thread and run it along the hook shank until it hangs level with the hook barb.
Prepare the hackle and tie in at the base of the hook shank.
Attach the dubbing to the tying thread and begin to build up the body of the fly.
Once you have dubbed the whole body make sure you leave enough space for the elk wing head (2 mm behind the hook eye) secure the dubbing with a few turns of tying thread.
Using a hackle plier wind on the hackle, palmered style along the whole of the dubbed body.
Tie off the hackle and trim off the access.
With the use of a small hair stacker even thew ends of a small bunch of elk hair. You can also remove the under wool at this stage.
Remove the hair from the stacker and lie it along the top of the hook as shown to measure the correct length of wing required.
Still holding the hair in place , change hands and make two loose turns of tying thread around the head of the fly, and pull tight. Make a couple more turns of tying thread to secure the wing.
You can now trim of the surplus elk hair butt ends to make that distinctive EHC head.
Tie off the tying thread and remove.
The finished Elk Hair Caddis.