Edson Tiger
The modifide Edson Tiger with the Brass Eyes.
I have had some questions about the Edson brass eyes and where they can be obtained. All the info is in this article alone with contact and purchase details.
One of the great classic American streamers, developed by the well know fly tier Bill Edson in 1929. The Edson Tiger dark & light where influenced by a streamer called “Dick´s Killer” that Edson received from fellow fly tier Dick Eastman of New Hampshire in 1928. The original patterns tied and sold by Edson where with jungle cock cheeks, but later he replaced the jungle cock with small teardrop brass plates which was apparently done, not only because of the increasing price of the already expensive jungle cock but also difficulty in obtaining a regular supply of it. But soon after the introduction of the metal cheeks they became so popular with his customers that they replaced the jungle cock on all his streamer patterns. But truth be told, the metal cheeks added a whole new dimension to how the patterns fished. With extra flash and weight in his streamers, there where few other patterns at this time that offered this. Although this pattern is almost a century old it still accounts for many a trout and has proven an excellent late season pattern for salt water sea trout fishing here in Scandinavia. A couple of years ago while tying at the Dutch fly fair, I was lucky enough to meet Chris Helm, who had for sale, the Edson Brass eyes.
Chris Helm doing his thing at the Dutch fly fair
If you contact Chris and purchase these eyes to add that extra dimension to you Tigers they do need a little work doing to them before they are ready to tie in. Using a pair of sharp wire cutters, these are not difficult to cut, they are made from brass after all, but sharp cutters make for a neater finish. You need to trim the side of the eye that is square into a point. Once this is done I use emery paper to sand the edges of the point to a fine taper, otherwise you will get a distinct mark under the tying thread where the the eye is secured.
Hook: Standard streamer # 6
Tag: Flat gold tinsel
Tail: Barred wood duck
Body: Peacock herl
Wing: Yellow buck tail
Topping: Red hackle fibers
Cheeks: Jungle cock or Edson Brass Eyes
Head: Yellow varnish
Secure your streamer hook in the vice. Attach your tying thread and run this along the hook shank. Tie in a length of flat gold tinsel for the tag, this should be just three or four turns.
Once you have tied off your tag and removed the surplus you can tie in three or four long strands of peacock herl at the base of the tag.
Select a wood duck flank feather with good barring and cut out a slip, line up all the bars if uneven and fold in half. This will give barring on each side of the tail. Tie off.
Run the tying thread back to the tail and twist together the peacock herl and tying thread to strengthen it and wind on to form the body. Tie off the peacock herl.
Select and clean a small bunch of yellow buck tailf or the wing. Stack the hair in a hair stacker. This should be no longer than the tail end.
The topping is a small bunch of red hackle fibers tied in on top of the wing as shown. It should be approximately one-third of the total wing length.
Now tie in the jungle cock cheeks, one each side. Make sure that both jungle cock eye´s are equal in size and well balanced. Whip finish.
All that is left to be done now to finish your EdsonnTiger is varnish the head yellow.
The Eyes are available along with a good
Edson Tiger
The modifide Edson Tiger with the Brass Eyes.
One of the great classic American streamers, developed by the well know fly tier Bill Edson in 1929. The Edson Tiger dark & light where influenced by a streamer called “Dick´s Killer” that Edson received from fellow fly tier Dick Eastman of New Hampshire in 1928. The original patterns tied and sold by Edson where with jungle cock cheeks, but later he replaced the jungle cock with small teardrop brass plates which was apparently done, not only because of the increasing price of the already expensive jungle cock but also difficulty in obtaining a regular supply of it. But soon after the introduction of the metal cheeks they became so popular with his customers that they replaced the jungle cock on all his streamer patterns. But truth be told, the metal cheeks added a whole new dimension to how the patterns fished. With extra flash and weight in his streamers, there where few other patterns at this time that offered this. Although this pattern is almost a century old it still accounts for many a trout and has proven an excellent late season pattern for salt water sea trout fishing here in Scandinavia. A couple of years ago while tying at the Dutch fly fair, I was lucky enough to meet Chris Helm, who had for sale, the Edson Brass eyes.
Chris Helm doing his thing at the Dutch fly fair
If you contact Chris and purchase these eyes to add that extra dimension to you Tigers they do need a little work doing to them before they are ready to tie in. Using a pair of sharp wire cutters, these are not difficult to cut, they are made from brass after all, but sharp cutters make for a neater finish. You need to trim the side of the eye that is square into a point. Once this is done I use emery paper to sand the edges of the point to a fine taper, otherwise you will get a distinct mark under the tying thread where the the eye is secured.
Hook: Standard streamer # 6
Tag: Flat gold tinsel
Tail: Barred wood duck
Body: Peacock herl
Wing: Yellow buck tail
Topping: Red hackle fibers
Cheeks: Jungle cock or Edson Brass Eyes
Head: Yellow varnish
Secure your streamer hook in the vice. Attach your tying thread and run this along the hook shank. Tie in a length of flat gold tinsel for the tag, this should be just three or four turns.
Once you have tied off your tag and removed the surplus you can tie in three or four long strands of peacock herl at the base of the tag.
Select a wood duck flank feather with good barring and cut out a slip, line up all the bars if uneven and fold in half. This will give barring on each side of the tail. Tie off.
Run the tying thread back to the tail and twist together the peacock herl and tying thread to strengthen it and wind on to form the body. Tie off the peacock herl.
Select and clean a small bunch of yellow buck tailf or the wing. Stack the hair in a hair stacker. This should be no longer than the tail end.
The topping is a small bunch of red hackle fibers tied in on top of the wing as shown. It should be approximately one-third of the total wing length.
Now tie in the jungle cock cheeks, one each side. Make sure that both jungle cock eye´s are equal in size and well balanced. Whip finish.
All that is left to be done now to finish your EdsonnTiger is varnish the head yellow.
The Eyes are available along with a good
Edson Tiger
The modifide Edson Tiger with the Brass Eyes.
One of the great classic American streamers, developed by the well know fly tier Bill Edson in 1929. The Edson Tiger dark & light where influenced by a streamer called “Dick´s Killer” that Edson received from fellow fly tier Dick Eastman of New Hampshire in 1928. The original patterns tied and sold by Edson where with jungle cock cheeks, but later he replaced the jungle cock with small teardrop brass plates which was apparently done, not only because of the increasing price of the already expensive jungle cock but also difficulty in obtaining a regular supply of it. But soon after the introduction of the metal cheeks they became so popular with his customers that they replaced the jungle cock on all his streamer patterns. But truth be told, the metal cheeks added a whole new dimension to how the patterns fished. With extra flash and weight in his streamers, there where few other patterns at this time that offered this. Although this pattern is almost a century old it still accounts for many a trout and has proven an excellent late season pattern for salt water sea trout fishing here in Scandinavia. A couple of years ago while tying at the Dutch fly fair, I was lucky enough to meet Chris Helm, who had for sale, the Edson Brass eyes.
Chris Helm doing his thing at the Dutch fly fair
If you contact Chris and purchase these eyes to add that extra dimension to you Tigers they do need a little work doing to them before they are ready to tie in. Using a pair of sharp wire cutters, these are not difficult to cut, they are made from brass after all, but sharp cutters make for a neater finish. You need to trim the side of the eye that is square into a point. Once this is done I use emery paper to sand the edges of the point to a fine taper, otherwise you will get a distinct mark under the tying thread where the the eye is secured.
Hook: Standard streamer # 6
Tag: Flat gold tinsel
Tail: Barred wood duck
Body: Peacock herl
Wing: Yellow buck tail
Topping: Red hackle fibers
Cheeks: Jungle cock or Edson Brass Eyes
Head: Yellow varnish
Secure your streamer hook in the vice. Attach your tying thread and run this along the hook shank. Tie in a length of flat gold tinsel for the tag, this should be just three or four turns.
Once you have tied off your tag and removed the surplus you can tie in three or four long strands of peacock herl at the base of the tag.
Select a wood duck flank feather with good barring and cut out a slip, line up all the bars if uneven and fold in half. This will give barring on each side of the tail. Tie off.
Run the tying thread back to the tail and twist together the peacock herl and tying thread to strengthen it and wind on to form the body. Tie off the peacock herl.
Select and clean a small bunch of yellow buck tailf or the wing. Stack the hair in a hair stacker. This should be no longer than the tail end.
The topping is a small bunch of red hackle fibers tied in on top of the wing as shown. It should be approximately one-third of the total wing length.
Now tie in the jungle cock cheeks, one each side. Make sure that both jungle cock eye´s are equal in size and well balanced. Whip finish.
All that is left to be done now to finish your EdsonnTiger is varnish the head yellow.
The Eyes are available along with a good
Edson Tiger
The modifide Edson Tiger with the Brass Eyes.
One of the great classic American streamers, developed by the well know fly tier Bill Edson in 1929. The Edson Tiger dark & light where influenced by a streamer called “Dick´s Killer” that Edson received from fellow fly tier Dick Eastman of New Hampshire in 1928. The original patterns tied and sold by Edson where with jungle cock cheeks, but later he replaced the jungle cock with small teardrop brass plates which was apparently done, not only because of the increasing price of the already expensive jungle cock but also difficulty in obtaining a regular supply of it. But soon after the introduction of the metal cheeks they became so popular with his customers that they replaced the jungle cock on all his streamer patterns. But truth be told, the metal cheeks added a whole new dimension to how the patterns fished. With extra flash and weight in his streamers, there where few other patterns at this time that offered this. Although this pattern is almost a century old it still accounts for many a trout and has proven an excellent late season pattern for salt water sea trout fishing here in Scandinavia. A couple of years ago while tying at the Dutch fly fair, I was lucky enough to meet Chris Helm, who had for sale, the Edson Brass eyes.
Chris Helm doing his thing at the Dutch fly fair
If you contact Chris and purchase these eyes to add that extra dimension to you Tigers they do need a little work doing to them before they are ready to tie in. Using a pair of sharp wire cutters, these are not difficult to cut, they are made from brass after all, but sharp cutters make for a neater finish. You need to trim the side of the eye that is square into a point. Once this is done I use emery paper to sand the edges of the point to a fine taper, otherwise you will get a distinct mark under the tying thread where the the eye is secured.
Hook: Standard streamer # 6
Tag: Flat gold tinsel
Tail: Barred wood duck
Body: Peacock herl
Wing: Yellow buck tail
Topping: Red hackle fibers
Cheeks: Jungle cock or Edson Brass Eyes
Head: Yellow varnish
Secure your streamer hook in the vice. Attach your tying thread and run this along the hook shank. Tie in a length of flat gold tinsel for the tag, this should be just three or four turns.
Once you have tied off your tag and removed the surplus you can tie in three or four long strands of peacock herl at the base of the tag.
Select a wood duck flank feather with good barring and cut out a slip, line up all the bars if uneven and fold in half. This will give barring on each side of the tail. Tie off.
Run the tying thread back to the tail and twist together the peacock herl and tying thread to strengthen it and wind on to form the body. Tie off the peacock herl.
Select and clean a small bunch of yellow buck tailf or the wing. Stack the hair in a hair stacker. This should be no longer than the tail end.
The topping is a small bunch of red hackle fibers tied in on top of the wing as shown. It should be approximately one-third of the total wing length.
Now tie in the jungle cock cheeks, one each side. Make sure that both jungle cock eye´s are equal in size and well balanced. Whip finish.
All that is left to be done now to finish your EdsonnTiger is varnish the head yellow.
The Eyes are available along with a good
